The pool surface is applied at this juncture. Plaster is mixed on site and applied in two coats then hand troweled to a non-slip waterproof surface. When the plaster is complete we will immediately begin filling the pool and/or spa. You can help ahead of this task by having your garden hose available for the fill. You will need to fill your pool until the water level reaches the center of the waterline tile (the parameter tile located at the top edge of your pool) or to the center of the skimmer. Your pool is then full and you may turn off the water. Do not turn the water off during the fill as this will cause a bathtub like ring to occur and stain your plaster.
Your pool is now complete and ready for start-up. One of our professional representatives will perform this start-up of your pool equipment for the first time. The equipment will need to remain operational for a full week to clear the water of any plaster dust or sediments. You'll want to schedule Pool School with our representatives who will provide you with instructions on how to maintain your new Custom Cool Pool. You will receive valuable 'on hand' instructions, explanations, and demonstrations on the operations and use of your new pool. Our representative will share with you the easy methods to clean the filter, empty your skimmer baskets, and check your chemicals. Only a minimal amount of maintenance will keep your pool working efficiently and clean for many years to come.
Construction debris will be cleaned away from both the interior and the exterior of the swimming pool at this time. If the exterior fence was taken down, it will be put back up in that municipalities require pool safety barriers to deter children from entering the pool.
